When installing a stainless steel hinge should pay attention to what issues? Here is a small make up to you information, if you are interested in will go to see together with small make up:
1, when installing a stainless steel hinge, according to the actual quality of door (window) to select the corresponding bearing quality levels of hinge, door (window) are free to end the change in vertical position is not greater than 1.5 mm, no deformation and damage at the same time, can be normally open or closed.
2, the upper door stainless steel hinge under static load, need to meet regulation, after the test there shall be no fracture. The window in the upper part of the hinge (pull) shall meet the regulations of the state under the static load, also cannot have a fracture phenomenon after test.
3, turn power close hinge shall not be greater than 40 n. Window hinges need to be repeated 25000 times, the door hinge (hinge) repeated opening and closing 100000 times.